基于一类弱连续T-模的模糊Hopfield神经网络研究

基于一般的弱连续T-模与取大（V）模糊算子的复合，建立了具有一般意义的动态模糊神经网络——模糊Hopfield神经网络，并系统分析了该动态系统的性能：在Hamming距离意义下证明了该网络是稳定的，而且其平衡点（吸引子）具有全局Lyapunov稳定性。最后，提供了一种有效的学习算法。     

高超声速滑翔飞行器变轨段自适应跟踪制导方法

针对高超声速滑翔飞行器变轨段大偏差条件下的标准轨迹跟踪问题,提出一种基于权值矩阵自适应修正的变轨段跟踪制导方法。分析了变轨段主要控制方式和标准轨迹特性;将简化的纵向运动方程在标准轨迹附近线性化;采用将误差项引进线性二次型性能指标加权矩阵的方式,设计了改进的权值自适应修正跟踪制导方法。CAV-H飞行器仿真分析表明,该方法能够实现高超声速滑翔飞行器变轨段高精度自适应跟踪制导,对初始及过程偏差具有良好的鲁棒性。     

Determination of suppliers' optimal quantity discount schedules with heterogeneous buyers

Although the quantity discount problem has been extensively studied in the realm of a single supplier and a single buyer, it is not well understood when a supplier has many different buyers. This paper presents an analysis of a supplier's quantity discount decision when there are many buyers with different demand and cost structures. A common discrete all‐unit quantity discount schedule with many break points is used. After formulating the model, we first analyze buyers' responses to a general discrete quantity discount schedule. This analysis establishes a framework for a supplier to formulate his quantity discount decision. Under this framework, the supplier's optimal quantity discount schedule can be formulated and solved by a simple non‐linear programming model. The applicability of the model is discussed with an application for a large U.S. distribution network. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 46–59, 2002; DOI 10.1002/nav.1052     

发动机冷却燃料超临界压力下做功潜力㶲分析

在高马赫数飞行下,超燃冲压发动机的燃料冷却量大于燃料燃烧量。为了降低燃料的冷却量以及实现燃料冷却量和燃烧量的匹配,采用分析法对超燃冲压发动机壁面燃料冷却工质在超临界压力下进行做功潜力分析。发动机壁面冷却燃料的特性决定其热量大小。根据发动机壁面温度分布、热流密度分布计算热量,建立稳定流动燃料工质的平衡方程。结果表明:在壁面最高温度为1200 K时,传入壁面的热量为562.4 k W,其中理论热量为541.3 k W;冷却燃料工质流量增加,最大输出功减小;燃料工质出口温度增加,输出功减小;燃料工质出口压力增加,输出功基本不变。     

一种新型的计算化学非平衡流动的解耦方法

给出一种计算化学非平衡流动的解耦方法。利用该方法从薄层近似N S方程出发 ,采用NND2M差分格式 ,数值模拟了H2 /O2 燃烧的超音速绕流场 ;计算表明这种方法可以有效地解决刚性问题 ,而且与现有的隐式算法相比 ,具有公式推导简便 ,占用内存少 ,计算效率高等优点 ,特别适合于多组分和多反应的情况     

高速核在高温热平衡等离子体中的非平衡弛豫过程对热核反应率参数的影响

高速核入射到高温热平衡等离子体背景中,由于入射核动能远大于背景等离体中带电粒子之平均动能,入射核在与背景等离子体达到热平衡之前,会存在一段逐渐损失能量的非平衡弛豫过程。本文以高速氘核入射到高温氘化锂等离子体为例,在计及氘核的这种非平衡弛豫过程时,给出了一种计算热核反应D(t,n)~4He之反应率参数的方法。氘核在弛豫过程中的能量损失考虑了氘核与各种带电粒子的库仑散射过程,其能量损失率采用快速带电粒子的慢化理论来计算;氘与背景等离子体中的原子核发生的核反应过程,考虑了非平衡状态下束靶机制的D(t,n)~4He反应和热平衡状态下的D(t.n)~4He反应。在暂未考虑核散射的情况下,计算结果表明,当等离子体温度在7.5KeV～20KeV范围内变化时,氘核的非平衡弛豫过程对热平衡状态下D(t,n)~4He反应率参数的修正因子大致在1.0062～1.0943范围内变动,且温度越高,修正因子越小。计算还表明,当温度一定时,修正因子随等离子体中粒子的数密度变化不明显。     

高超声速滑翔导弹气动参数自适应跟踪建模

针对高超声速滑翔导弹跟踪中状态模型构建问题，研究基于制导变量变化规律的气动参数建模方法。对气动参数进行分析，指出传统建模方法的缺点。在假设制导变量服从一阶时滞过程的前提下，利用线性化的气动系数推导气动参数模型，通过分析不同飞行状态下的模型变式，证明模型对目标机动具有自适应性。对模型中未知参数的取值问题进行讨论，实现模型与飞行状态的自适应匹配。仿真结果表明：当目标发生机动时，所提模型性能明显优于传统模型。同时，在不同滤波器参数条件下的仿真结果进一步证实了模型的有效性。     

军用认知无线电网络中功率控制博弈算法的探讨

通过对比军用认知无线功率控制博弈模型与一些经典的功率控制博弈算法,提出了一种认知无线电网络中的功率控制的博弈算法。通过仿真结果性能分析,证明算法具有一定的优越性,并且能够为军事无线通信提供一定的理论依据和现实作用。     

混合均衡问题和不动点问题的公共元的迭代算法

在Hilbert空间中,利用超梯度算法,用以逼近混合均衡问题的解集与半压缩映像不动点集的公共元,并且证明了该算法的收敛性。使用新的分析技巧证明了一个强收敛定理。     

Effects of nano-sized aluminum on detonation characteristics and metal acceleration for RDX-based aluminized explosive

Nano-sized aluminum(Nano-Al)powders hold promise in enhancing the total energy of explosives and the metal acceleration ability at the same time.However,the near-detonation zone effects of reaction between Nano-Al with detonation products remain unclear.In this study,the overall reaction process of 170 nm Al with RDX explosive and its effect on detonation characteristics,detonation reaction zone,and the metal acceleration ability were comprehensively investigated through a variety of experiments such as the detonation velocity test,detonation pressure test,explosive/window interface velocity test and confined plate push test using high-resolution laser interferometry.Lithium fluoride(LiF),which has an inert behavior during the explosion,was used as a control to compare the contribution of the reaction of aluminum.A thermochemical approach that took into account the reactivity of aluminum and ensuing detonation products was adopted to calculate the additional energy release by afterburn.Combining the numerical simulations based on the calculated afterburn energy and experimental results,the param-eters in the detonation equation of state describing the Nano-Al reaction characteristics were calibrated.This study found that when the 170 nm Al content is from 0％to 15％,every 5％increase of aluminum resulted in about a 1.3％decrease in detonation velocity.Manganin pressure gauge measurement showed no significant enhancement in detonation pressure.The detonation reaction time and reaction zone length of RDX/Al/wax/80/15/5 explosive is 64 ns and 0.47 mm,which is respectively 14％and 8％higher than that of RDX/wax/95/5 explosive(57 ns and 0.39 mm).Explosive/window interface velocity curves show that 170 nm Al mainly reacted with the RDX detonation products after the detonation front.For the recording time of about 10 μs throughout the plate push test duration,the maximum plate velocity and plate acceleration time accelerated by RDX/Al/wax/80/15/5 explosive is 12％and 2.9 μs higher than that of RDX/LiF/wax/80/15/5,respectively,indicating that the aluminum reaction energy significantly increased the metal acceleration time and ability of the explosive.Numerical simulations with JWLM explosive equation of state show that when the detonation products expanded to 2 times the initial volume,over 80％of the aluminum had reacted,implying very high reactivity.These results are significant in attaining a clear understanding of the reaction mechanism of Nano-Al in the development of aluminized explosives.